工程質量鑒定報告
質量監督機構在交工驗收前質量檢測、檢查，竣工驗收前復測、復查和監督過程中檢查資料基礎上的形成工程質量鑒定報告
1、工程質量鑒定報告注意事項
以竣工驗收前的復測的資料替代交工驗收時檢測的相應指標的數據，并對發生變化或衰減情況進一步分析，在鑒定報告中進行說明。
外觀質量也應在竣工驗收前進行復查，特別是結構物的變形、裂縫、高邊坡的穩定情況、不良地質路段的路基穩定性，路面的病害及修補情況等應進行詳細復查，以全面掌握工程質量的現狀。復查的結果作為質量鑒定的依據。對外觀變化較大的部位應在鑒定報告中做出詳細說明。
交工驗收檢測提出問題的落實情況，交工驗收證書提出問題的落實情況也應作為復測的主要內容，在鑒定報告中做出說明。
2、工程質量鑒定報告格式、內容如下：
工程質量鑒定報告（格式）
一、項目基本情況
（一）項目概況：介紹項目地理位置、包含工程內
Quality of the project appraisal report
Completion Acceptance of Quality Supervision, agencies prior to the quality of testing, inspection, repeat testing prior to final acceptance, review and monitor the process of inspection data based on the quality of the project appraisal report form
1, quality appraisal reports note
To the complex before the final acceptance test data when testing for Completion Acceptance of alternative indicators corresponding data, and to change or attenuation of further analysis, carried out instructions in the verification report.
Appearance quality should also be reviewed before final acceptance, especially in structures of deformation, fracture, the stability of high slope, poor stability of the geological section of the roadbed, road surface conditions such as disease and repair should be checked carefully, to fully grasp project quality status. Review the results as the quality of identification. Changes on the appearance of large parts of the report should be made in the identification details.
Acceptance inspection of implementation questions, questions for Completion Acceptance Certificate of the implementation should be measured again as the main contents of the report in the identification of an explanation.
2, quality appraisal report format, as follows:
Quality of the project appraisal report (format)
I. Basic Information
(A) Project summary: The project location, including works within the
 

前往下載