消防工程施工方案.doc
進入下載頁
消防工程
第一節 施工現場基本要求
一.基本要求
1.現場要有明顯的防火宣傳標志,每月對職工進行一次防火教育,定期組織防火檢查,建立防火工作檔案。
2.電工,焊工從事電氣設備安裝電、氣焊作業,要有操作證和用火證。動火前要清除附近易燃物,配備看火人員和滅火用具。用火證當日有效。動火地點變換,要重新辦理用火手續。
3.使用電氣設備和易燃、易爆物品,必須嚴格防火措施,指定防火負責人,配備滅火器材,確保施工安全。
4.因施工需要搭設臨時建筑,應符合防盜、防火要求,不得使用易燃材料。城區內的工地一般不準支搭木板房。必須支搭時,須經消防監督機關批準。
5.施工材料的堆放、保管,應符合防火安全要求,庫房應用非燃材料搭設。易燃、易爆物品,應專庫儲存,分類單獨
Fire Engineering
Basic requirements of Section I construction site
1. Basic requirements
1. On-site fire prevention should be obvious signs of the staff to conduct a monthly fire safety education, with periodic fire prevention inspections, the establishment of fire prevention files.
2. Electricians, welders and in electrical equipment, installation of electric, gas welding operation, there must be operating permit and permit the use of fire. Removed before hot work near flammable objects, equipped with fire personnel and fire-fighting equipment to see. Fire certificate valid on the day. Hot work location change, we must re-apply for the use of fire procedures.
3. Use of electrical equipment and flammable, explosive materials, fire prevention measures must be strictly designated fire head equipped with fire fighting equipment, to ensure construction safety.
4. Erection of temporary buildings for construction needs, should meet the security, fire protection requirements, shall not use combustible materials. The site is generally not allowed within the city take the panel houses with poor support. Take the time to be supported, subject to fire inspection authority.
5. Construction materials piled up, custody, shall comply with fire safety requirements of the application of non-combustible material warehouse erection. Flammable, explosive materials, shall be devoted to library storage, classification alone
